Skip to content Skip to sidebar Skip to footer

How to fix Lenovo cellphone stuck on the logo

Causes of Lenovo HP stuck on the logo and how to fix it

As one of the leading manufacturers of electronic devices in the world, Lenovo does have many interesting products. From laptops to cellphones, products made by Lenovo are always worthy of being considered by consumers.

Yes, one of the most successful product lines from this brand is their smartphone. With a competitive price, HP Lenovo has indeed managed to get a place in the market. Maybe this is also the reason you can come to this page to find a way to solve the problem of the Lenovo HP stuck at the logo.

You need to know that the problem of an Android cellphone stuck in this logo is not only experienced by products from the Lenovo brand. Not a few similar cases happened to HP from other brands that were even earlier or even more popular than Lenovo. So cause Lenovo HP stuck at the logo which we will discuss this time, can also apply to other phones.

The stuck condition in this logo can be explained as a cellphone that cannot enter the home screen display, only displays the HP brand or brand logo and does not show any sign of logging into the system after more than 30 minutes or even more.

Initially it was not always when the phone was turned on, but also when it was being used though. Suddenly the HP turns off, then turns on again in the condition as mentioned earlier.

In addition to calling it stuck in the logo, many also call this condition stuck, hang or stuck. Unlike the bootloop condition where the phone will continue to restart until it runs out of power. In this stuck condition, your Lenovo cellphone doesn’t restart but just sits on the Lenovo logo.

In general, the cause of an Android smartphone or Android smartphone Lenovo HP stuck at the logo among others as below:

System Error

Related to the failure of reading data and software by the system. This can be due to corrupt or damaged data in system files. The trigger, can be due to user behavior, new applications or android system management and so on. Failure to read or find this data resulted in the HP not being able to complete the boot process until it was stuck in the bootloader only.

Root

If you are an advanced user or superuser, you should already be aware of the effects of the changes you make on a phone with root access. Actually, root doesn’t necessarily damage the cellphone, it’s just that you, the application or that malicious site can tamper with the system which results are the same as the conditions in the point above.

Custom ROM

Furthermore, apart from just opening root access above, using ROMs other than those brought by Lenovo can also end up in a stuck condition. Any discrepancy between the Custom ROM and the kernel or hardware can lead to a failed boot process. It is also possible that there are features that have not been perfected or bugs by the Chief or the ROM Developer.

Hardware

It could be that the problem of failing to boot or stuck in this logo is also caused by the internal hardware of your Lenovo HP. Under certain conditions, the phone needs to make sure the specific hardware is in normal working condition in order for it to be able to finish booting up. However, this often leads to a bootloop condition.

There are several ways you can do to get out of the stuck condition on this logo, including the following:

Restart

Restart aims to refresh or try to re-read data and software by the system. Restarting can also reduce the load on the system periodically by deleting data that is not used or closing applications that are not used. This is the reason why you are recommended to restart occasionally, even once a day.

The method is also easy, simply by removing the battery for the Lenovo HP which is removable (removable). For the embedded battery, you can press the power button until the screen turns off. Also remove the SIM Card and MicroSD and leave it for a few minutes. After that, try restarting the phone by installing the battery, SIM card and memory.

Clear Cache

Cache is data that the system needs in order to run the applications and tasks requested. As usage goes on, this data gets bigger in size on the internal storage until it becomes an additional burden.

This is what then can also cause the system to become an error, forcing the cellphone to restart. Unfortunately, not infrequently HP is not able to finish booting.

You can only delete the cache in a stuck condition from Recovery mode. Obviously, because you can’t access the settings. Turn off the cellphone in the above way, then enter Recovery mode using the combination button according to the type of your Lenovo cellphone.

Once in that mode, point the highlight to the Clear Cache Partition option and confirm by selecting Yes or OK. Then also point the highlight to the Clear Dalvik Cache option and confirm again. Finally, navigate to Reboot System Now to restart the phone.

Factory Reset

The steps above should be able to make your phone return to the home screen. However, if it doesn’t work, the next step is to do a Factory Reset. You can also do this from the Recovery mode above. The difference is, the selected option is Wipe Data / Factory Reset.

This will delete all data stored in the internal memory of the HP and restore it to factory settings. All your personal files and apps you installed will be deleted as well, including the cause of the problem Lenovo HP stuck at the logo. Consider whether this step is necessary.

Re-flash

If the data error or corruption cannot be recovered by factory reset, then the repair can be done by writing firmware or system from outside. The trick is to do flashing using computer software such as QFIL and so on.

You can do this re-flash yourself by downloading the firmware according to the type of cellphone or leaving this work to a professional such as a counter or service center.

How, already have an idea with what you can do to solve the problem Lenovo HP stuck at the logo this? Stay calm and don’t panic so you can perform the steps well explained. Good luck.