Clear Temper Code to Remove Checkword 2022
Not infrequently, there are some people who often experience problems or problems like that.
The reason is, not all people know that the seal of this electricity meter should not be arbitrarily opened other than by PLN officers.
Because, if you keep forcing yourself to open it yourself, then there will be a high probability that it will cause a ‘Check’ message to appear and the electricity will immediately go out.
However, this case often occurs in token-type electricity meters that have a code that already consists of several different digits.
If you experience a similar thing and also can’t fill out the electricity token, because there is the word ‘Check’ written on it, then you have to deal with it by filling in the most appropriate clear temper code.
You need to know, for this clear temper itself, it consists of a twenty digit token number which is very useful for re-activating a prepaid type meter where the seal has been opened.
A sign when the seal has been opened is that the words ‘Check’ appear on the home electricity meter display.
This check reset code aims to make it easier for PLN officers when dealing with disturbances and problems with prepaid meters.
And moreover, if the obstacles and disturbances are occurring outside of working hours.
Not only that, another purpose of this clear temper code is to reduce fraud and theft of electricity by modifying one part of the electricity meter.
In the Tamper section, this can also be referred to as a security code found on the prepaid electricity meter.
And in this article, we will discuss the clear temper code to be able to eliminate the check word.
For more details, just refer to the discussion about the clear temper code to eliminate the following check words.
Clear Temper Code to Remove Checkword
How to Enter Clear Temper Code to Remove Checkword
 |
| How to Enter Clear Temper Code to Remove Checkword |
After you contact the PLN official call center or CC and manage to get the code.
Then it’s time for you to put it into the electricity meter in your house.
You can follow the simple and easy steps below for how to enter the clear temper code to remove the check word:
- Before you enter the code, make sure first if the meter is on and it says ‘Check’.
- After that, then you enter all the numbers from the temper code one by one.
- If you have entered all the token codes, now just press the ‘Enter’ button or the arrow found on the electricity meter.
- And also make sure that the numbers you have entered are valid and correct.
- And later, if you succeed, the ‘Check’ writing on the meter will immediately disappear and you can also fill in the electricity token as before.
- Done.
The final word
That’s a review of the clear temper code to be able to eliminate the check word that you can get by contacting the official PLN call center number.
The emergence of the word check itself is quite a lot of causes, but in general this often occurs due to current leakage problems.
Not only that, the opening of the meter cover, whether intentionally or not, will also cause the electricity meter to issue a check notification and the tempered light to turn on.
That’s the whole content of our discussion this time about clear temper code to remove check word. Hopefully useful and good luck.
