Skip to content Skip to sidebar Skip to footer

How to shoot WiFi remotely with minimal capital

How to Shoot WiFi Remotely With Minimal Funds How to shoot WiFi remotely can be done easily in their respective homes.  Even those of you who have minimal funds can try the tutorials that we provide.  The cost to buy tools and materials is not up to 100 thousand.  So very minimal.  The range of the device to a WiFi source is up to 100 meters.  How to?  Is it difficult and complicated for beginners to apply?  For those who want to know more, you can check the following reviews.  ext Tools And Materials Before Shooting Wifi Remote In order for the process of shooting WiFi remotely to be carried out, you must prepare some tools and materials in advance.  The tools and materials are as follows: 1. Must have a computer or laptop.  For those who don't have one, they can borrow a neighbor or friend first. 2. TPLink TL–WN72N, this tool is used to shoot WiFi.  In the market the price of the tool is only IDR 100 thousand. 3. USB Extender cable, this cable is actually not mandatory to buy.  But if you want to buy it is also not a problem.  The point is to increase the range of the WiFi signal you want to shoot.  5 to 10 meters long.  4. The WiFi you want to shoot, if you don't have your own WiFi, you can use school WiFi or another. The Easiest Way to Shoot Remote Wifi After preparing the tools and materials above, you can start the method to shoot WiFi.  The steps are as follows: 1. Install the Driver After unpacking the TP Link, you can use the small cassette section containing the driver.  For those whose computers or laptops do not provide a cassette playback area, you can download the software first.  The installation process is like the process of installing applications in general, just follow the tutorials and guides in the driver.  2. Connect the USB Extender and TPLink After the driver is installed on the device, you can simply connect the USB Extender and TPLink that have been prepared.  Once the two materials are connected, you can place the TPLink on a higher ground.  The goal is that the signal received is maximized.  3. Connect the USB Extender to your laptop/computer. After the TPLink is placed on a higher ground, you can plug the USB Extender into the laptop or computer you are using.  After the two are connected, usually the indicator light on the Extender will turn green.  If the light doesn't light up, there's a good chance the extender cable has a problem.  Just check first.  4. Connect to WiFi After completing the above method, you can connect the device to the WiFi that was being shot earlier.  You can select the WiFi icon and then also select Wi-Fi2.  Next you simply connect the device to the WiFi that is being shot only.  If the device is connected, you have done this method well.  Some Reasons Why Shooting Remote Wifi Keeps Failing There may be several reasons why your WiFi doesn't work or keeps failing.  The main reason is the distance between the WiFi and the device is too far.  Not to mention that there are some snags that interfere with the WiFi performance being shot.  For example, such as large trees, walls, houses and so on.  For those who want a wider signal range, you can put TPLInk on top of a house or building.  If necessary, also use bamboo that is 10 meters long.  Still not connected?  Maybe the extender cable you are using is not of good quality or is damaged.  You can replace it first.  How to shoot WiFi remotely is actually very easy, even for beginners.  While using the WiFi, sometimes you will experience some disturbances.  For example, disconnected WiFi and so on.

How to shoot long distance WiFi can be done easily at their respective homes. Even those of you who have minimal funds can try the tutorials that we provide. The cost to buy tools and materials is not up to 100 thousand.

So very minimal. The range of the device to a WiFi source is up to 100 meters. How to? Is it difficult and complicated for beginners to apply? For those who want to know more, you can check the following reviews. ext

Tools And Materials Before Shooting Remote Wifi

In order for the remote WiFi shooting process to be carried out, you must prepare some tools and materials in advance. The tools and materials are as follows:

  1. Must have a computer or laptop. For those who don’t have one, they can borrow a neighbor or friend first
  2. TPLink TL–WN72N, this tool is used to shoot WiFi. In the market the price of the tool is only IDR 100 thousand
  3. USB Extender cable, this cable is actually not mandatory to buy. But if you want to buy it is also not a problem. The point is to increase the range of the WiFi signal you want to shoot. 5 to 10 meters long.
  4. WiFi you want to shoot, if you don’t have your own WiFi, you can use school WiFi or other

The Easiest Way to Shoot Long Distance Wifi

After preparing the above tools and materials, you can start the way to shoot WiFi. The method is as follows:

After unpacking the TP Link, you can use the small cassette section that contains the driver. For those whose computers or laptops do not provide a cassette playback area, you can download the software first. The installation process is like the process of installing applications in general, just follow the tutorials and guides in the driver.

  • Connect USB Extender as well as TPLink

After the driver is installed on the device, you can simply connect the prepared USB Extender and TPLink. Once the two materials are connected, you can place the TPLink on a higher ground. The goal is that the signal received is maximized.

  • Connect the USB Extender to a laptop/computer

After the TPLink is placed in a higher place, you can plug the USB Extender into the laptop or computer you are using. After the two are connected, usually the indicator light on the Extender will turn green. If the light doesn’t light up, there’s a good chance the extender cable has a problem. Just check first.

After completing the above method, you can connect the device to the WiFi that was being shot earlier. You can select the WiFi icon and then also select Wi-Fi2.

Next you simply connect the device to the WiFi that is being shot only. If the device is connected, you have done this method well.

Some Reasons Why Shooting Remote Wifi Keeps Failing

There may be several reasons why your WiFi doesn’t work or keeps failing. The main reason is the distance between the WiFi and the device is too far.

Not to mention that there are some snags that interfere with the WiFi performance being shot. For example, such as large trees, walls, houses and so on.

For those who want a wider signal range, you can put TPLInk on top of a house or building. If necessary, also use bamboo that is 10 meters long.

Still not connected? Maybe the extender cable you are using is not of good quality or is damaged. You can replace it first.

Also read: How to Print Via Android Phone Via Wifi

How to shoot WiFi remotely is actually very easy, even for beginners. While using the WiFi, sometimes you will experience some disturbances. For example, disconnected WiFi and so on.